Jetson Crush handleiding
Handleiding
Je bekijkt pagina 16 van 68
14
1. CAREFULLY POSITION THE SEAT UPSIDE DOWN ON A SOFT SURFACE.
2. MOVE THE MIDDLE SEAT LIGHT WIRE OUT FROM THE CENTER OF THE SEAT
SO THAT IT IS DANGLING OVER THE EDGE.
3. CAREFULLY FLIP THE FRAME UPSIDE DOWN SO THAT THE WHEEL IS ON TOP.
4. POSITION THE CROSSBAR ON THE FRAME ON TOP OF THE SEAT BOTTOM
SUCH THAT THE 4 HOLES IN THE FRAME ARE ALIGNED WITH THE 4 HOLES IN
THE BOTTOM OF THE SEAT. ENSURE THAT THE FRAME IS NOT ON TOP OF OR
INHIBITING MOVEMENT OF EITHER THE SEAT LIGHT OR FRAME LIGHT WIRE.
5. PLACE A WASHER ("B") ON THE STEM OF EACH MEDIUM BOLT ("A").
6. INSERT A BOLT WITH WASHER THROUGH EACH SET OF ALIGNED HOLES
AND INTO THE SEAT BY TWISTING IT CLOCKWISE WITH YOUR FINGERS.
7. ONCE ALL FOUR BOLTS HAVE BEEN INSERTED, TIGHTEN EACH BY TURNING
IT CLOCKWISE WITH THE 13MM BOX WRENCH.
IMPORTANT: DO NOT OVER-TIGHTEN THE BOLTS. OVER-TIGHTENING CAN
CAUSE THE SEAT TO CRACK.
8. CONNECT THE SEAT LIGHT WIRE WITH THE PLUG ON THE FRAME
LIGHT WIRE.
13MM BOX WRENCH
FRAME AND SEAT LIGHT WIRES
1.2 Attaching the Seat to the Frame
Bekijk gratis de handleiding van Jetson Crush, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jetson |
| Model | Crush |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5745 MB |
