Handleiding
Je bekijkt pagina 19 van 24
Control 426C/T
Enhanced Coverage Series -- Compact 6.5" Full-Range Ceiling Loudspeaker with Coplanar RBI
www.jblpro.com
Highlights
The Control 426C/T is a compact, premium-
performance ceiling speaker, with a 165 mm (6.5 in)
woofer, featuring the JBL-exclusive CRBI™ Coplanar
Radiation Boundary Integrator technology, which
delivers extremely consistent coverage of the listening
space. CRBI technology results in an especially
smooth sound character that remains consistent, clear,
and pleasant, even in the off-axis coverage areas. It
reduces on-axis hot spots and off-axis cold spots, and
it can allow for the use of fewer speakers, reducing the
cost of the sound system without sacrificing
performance.
The full-face bezel-less grille blends beautifully into
room décor, and the magnetic attachment of the grille
is supplemented with an easy-to-apply safety tether.
High power handling, wide frequency response and
low distortion make the Control 426C/T ideal for sound
systems requiring a higher fidelity sound. The premium
performance capability ensures excellent sound
character, providing pleasant, enveloping sound
throughout the listening space. The Control 426C/T is
well-suited for a wide variety of applications from
conference rooms and learning spaces to restaurants
and retail stores.
The direct input’s high 12-ohm impedance allows
connecting up to 3 speakers in parallel on a 4-ohm
rated amplifier channel. For distributed systems, the
transformer is designed for exceptionally low-
saturation, even at high drive levels, providing top
quality, low distortion distributed sound character. The
optimized ported enclosure delivers warm, smooth
bass response. Low frequency output can be further
Key Features
Coaxially mounted 165 mm (6.5 in) woofer and
25 mm (1.0 in) soft-dome tweeter.
Stylish bezel-less grille blends elegantly into room
design.
JBL-exclusive CRBI Coplanar Radiation Boundary
Integrator technology provides consistent coverage
throughout the listening space.
Wide 72 Hz – 19 kHz frequency range.
110 W (440 W peak) power handling (at 12-ohm
setting) with 60 W multi-tap transformer for use in
70 V or 100 V distributed systems.
augmented with the addition of Control 419CS/T or
another of the Control Contractor subwoofer models.
The 165 mm (6.5 in) low-frequency driver is
acoustically loaded via the JBL-exclusive CRBI loading
plate, increasing both efficiency and sensitivity, for
higher output. The CRBI’s unique L-shaped radial
apertures provide smooth LF frequency response and
a tight, impactful sound.
A coaxially mounted 25 mm (1.0 in) soft-dome tweeter
provides high fidelity sound character and the
neodymium magnet assembly and Kapton™ voice coil
former provide durability. The drivers are designed for
long-term reliability, and built-in protection circuitry
helps to prevent damage from occasional overload.
The uniform 110° coverage angle, along with CRBI
provides consistent coverage throughout the listening
area. It allows for the use of fewer speakers, making
installations much simpler and less expensive without
sacrificing quality.
The speaker is packaged with grille, integral backcan,
c-ring, and tile rails for fast installation. The included
white grille is paintable (grille backing is removeable
and re-applicable for painting), and optional accessory
grilles are available in black (JBL-MTC-426BG) and in
square (JBL-MTC-426SG, white only).
The Control 426C/T is UL1480A and UL2043 listed.
Shown both with and without included white, round grille.
Bekijk gratis de handleiding van JBL Control 426C/T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JBL |
| Model | Control 426C/T |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 3271 MB |
