Handleiding
Je bekijkt pagina 6 van 23
QUICK START GUIDE
Put the monitor face down on a stable and smooth surface, pay attention not to damage or scratch the front glass /
screen. It’s better putting a soft piece of cloth on the table beforehand to protect the monitor. Make sure the monitor
is unplugged before starting installation.
SETTING UP THE MONITOR
1. Put the monitor face down on a stable and smooth surface.
2. Position the neck on the back of the monitor, placing it as shown in the picture below and use the 4 screws
provided to fix it. Screw without force.
3. Clip the stand, rounded side on the screen side, on the underside of the neck.
4. Make sure the stand and base are firmly attached.
5. Make sure both monitor and computer are unplugged.
6. Plug power cord and signal cable (HDMI or VGA or DP etc..) to the monitor.
7. Plug the computer and monitor power cord to the power supply.
8. Turn on the monitor and computer.
NOTE / CAUTION
After turning on computer and monitor if no image is displaying make sure you have chosen the right signal cable.
Please make sure to earth the power cord.
6
Bekijk gratis de handleiding van Japannext JN-T2822UHD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Japannext |
| Model | JN-T2822UHD |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3915 MB |
