Handleiding
Je bekijkt pagina 12 van 26
12
Symptoms Checkpoint
Power LED does not
turn ON
• Have you pressed the power button on the monitor and conrmed that it is turned on?
• Conrm that the power cord is correctly connected to both the monitor and the power outlet.
Power LED is on,
but there is no image
• Has the blank screen saver been activated? Move the mouse or keyboard to check.
• Check that the brightness and contrast are not set to minimum.
• Conrm that the signal cable is correctly connected to both the monitor and the computer.
• Check that the pins on the signal cable are not bent and that the cable is not damaged.
• Is the computer powered on? If you have another monitor, try connecting it to the computer to
conrm that it is working correctly.
• Does the computer’s signal timing match the specications of the monitor?
The image is distorted
or there are wave pat-
terns in the video
• Conrm that the signal cable is correctly connected to both the monitor and the computer.
• Move any electrical equipment that may be causing electrical interference away from the
monitor.
• Is the voltage normal? Do not use a octopus wiring setup.
• Does the computer’s signal timing match the specications of the monitor?
The position of the
image is shifted to
one side
The size of the image is
incorrect
• Is the computer’s resolution correct?
• Does the computer’s signal timing match the specications of the monitor?
The screen is too
bright / too dark
• Adjust the brightness and contrast settings from the screen (OSD) menu.
The image is blurry or
unclear
• Set the display resolution on the PC to the same native resolution as the recommended screen
mode of the monitor.
• Does the computer’s signal timing match the specications of the monitor?
• Check that the pins on the signal cable are not bent and that the cable is not damaged.
The video color is o • Check that the pins on the signal cable are not bent and that the cable is not damaged.
• Adjust the red/blue/green color settings from the screen (OSD) menu.
• Reset the settings from the screen (OSD) menu.
• Does the computer’s signal timing match the specications of the monitor?
Cannot display UHD • This product supports a maximum resolution of 3840x2160 (UHD), including HDMI, DP.
However, some graphics cards may not support 3840x2160. Please check with your nearest
dealer or manufacturer regarding the hardware limitations of your computer.
Abnormal noise • Is the cable correctly connected?
FAQ
* Please note that the design, specications, and appearance of the product may be changed
without notice for product improvement.
* If there is a discrepancy between the information provided and the actual product, the actual
product will take precedence.
Bekijk gratis de handleiding van Japannext JN-IPS2802UHDR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Japannext |
| Model | JN-IPS2802UHDR |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 2331 MB |
