Janome Travel Mate TM50 handleiding
Handleiding
Je bekijkt pagina 43 van 58
41
v Open the fabric after sewing is nished.
NOTE:
If the needle pierces too far left, the stitch will show
through on the right side of the fabric.
Blind Hemming
q Stitch pattern: 11 or 12
w Thread tension dial: 1 to 4 (for stitch pattern 11)
3 to 6 (for stitch pattern 12)
e Presser foot: Blind hem foot G
z Fold a hem with the wrong side of the fabric up to
form a 0.5 cm (1/4˝) allowance.
q Wrong side of fabric
w 0.5 cm (1/4˝)
(1) On heavyweight fabrics that tend to ravel, the raw
edge should be overcast rst.
(2) Fold the hem under the fabric for lightweight
fabrics.
x Place the fabric so that the fold is next to the guide on
the foot.
Lower the presser foot.
Adjust the needle drop position if necessary.
c Sew while guiding the folded edge.
e Folded edge
r Guide
Adjusting the needle drop position
Adjust the needle drop position as follows:
Press the “–” sign on the stitch width adjusting key q to
move the needle to the right.
Press the “+” sign on the stitch width adjusting key q to
move the needle to the left.
q Stitch width adjusting key
The LCD display shows a distance from the center
needle drop position in millimeters.
The needle drop position can be varied from 0.0 to 1.2.
NOTE:
The needle drop position can be moved, but the stitch
width will remain the same.
z
x c
v
q
w
e
r
q
w
(1)
(2)
4
w eq
q
Bekijk gratis de handleiding van Janome Travel Mate TM50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Travel Mate TM50 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 6811 MB |
