Janome Sew Fresh handleiding
Handleiding
Je bekijkt pagina 16 van 28
14
q
q Center needle position
w Guide lines
e Numbers
Seam Guide Lines
The numbers on the needle plate indicate the
distance between the center needle position and
the guideline.
The numbers in front are centimeters.
The numbers in back are fractions of an inch.
Number 15 20 4/8 5/8 6/8
Distance (cm) 1.5 2.0 1.3 1.6 1.9
Turning a Square Corner
Toturnasquarecorner5/8”(1.6cm)fromthe
fabric edge.
Stop stitching and lower the needle by turning the
handwheel counterclockwise.
Raise the presser foot and turn the fabric to line
theedgewiththe5/8”(1.6cm)seamguide.
Lower the presser foot and begin stitching in the
new direction.
Line up the fabric edge facing you with the
cornering guide shown.
q
Cornering guide
q Pattern selector: C
w Presser foot: Zigzag foot
e Thread tension: 2–5
r Stitch length: 0.5–4
Zigzag Stitching
Simple zigzag stitching is widely used for
overcasting, sewing on buttons, etc.
Turn the pattern selector between the zigzag
stitch (C) and straight stitch (left position) (B) to
adjust the stitch width.
q
w
e
w e
q
r
Bekijk gratis de handleiding van Janome Sew Fresh, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Sew Fresh |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 2776 MB |
