Janome MOD-Serger handleiding
Handleiding
Je bekijkt pagina 74 van 88
72
PIN TUCKING
*
Refer to page 62 (Narrow Hemming) for thread
tension balance adjustment.
1 Pin tucking
Thread and Fabric
Fabric
Light to
Medium
Fabric
Needle thread on the
right
Upper looper thread
Lower looper thread
Synthetic : No. 60~80
Silk : No. 50~80
Synthetic : No. 60~100
Silk : No. 50~100
Thread
Machine Setting
1 Remove the needle on the left-hand side
2 Needle plate setting knob : R
3 Upper knife : Down
Sewing
Turn off the power switch.
Remove the needle on the left-hand side.
Deactivate the upper knife.
Turn on the power switch, then sew the folded edge
while guiding along the guide line.
1 Folded edge
2 Guide line on the needle plate
3 Right needle position line on the presser foot
4 Left needle position line on the presser foot
5 Right side of fabric
Open the fold flat and press the pin tucks to one side.
NOTE: After you finish sewing,return the upper knife
to rhe original position.
HA-1 SP No.11 or No.14
1
2
2
1
3
1
3
4
5
6
6 Pin tucking
Bekijk gratis de handleiding van Janome MOD-Serger, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | MOD-Serger |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 10882 MB |
