Janome Memory Craft 100E handleiding
Handleiding
Je bekijkt pagina 90 van 112
88
Oil the Y-carriage
1.
Press the home position key to return the carriage to
the home position.
Turn the power switch OFF.
(1) Home position key
(2) Power switch
2.
Retract the carriage arm and remove the setscrew A.
(3) Setscrew A
3.
Extend the carriage arm and remove the setscrew B.
(4) Setscrew B
4.
Tilt the sewing machine in the direction of the arrow
so that the front comes to the underside of the
machine.
5.
While lifting up the Y carriage cover, release the two
hooks and remove the Y carriage cover.
(5) Hooks
(6) Y carriage cover
6.
Oil the arrow point (felt) as indicated in the illustration.
To attach the carriage cover, follow the procedures in
reverse.
Oiling the Machine
WARNING:
• Move the carriage to the home position, turn the
power switch OFF, and unplug the machine before
oiling the machine.
• Wait until the motor cools down before oiling.
• Do not dismantle the machine in any way other than
as explained in this section.
• Do not oil any parts other than as explained in this
section.
NOTE:
• Oil the points as shown at least once a month if you
are using the machine every day.
• Use good quality sewing machine oil.
• One or two drops of oil is sufcient.
• Remove excess oil, otherwise it may stain fabric.
• In case machine is not used for an extended time, oil
it before sewing.
• A Phillips head screwdriver is not included with this
machine.
• Be sure to oil in order as follows.
NOTE:
Be careful not to damage any parts when raising the
machine.
2.
3.
4. 5.
6.
(3)
(4)
(5)
1.
(2)
(6)
(1)
Bekijk gratis de handleiding van Janome Memory Craft 100E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 100E |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 24843 MB |
