Janome Memory Craft 100E handleiding
Handleiding
Je bekijkt pagina 9 van 112
7
GETTING READY TO SEWREADY TO SEW
Connecting the Power Supply
1.
First make sure the power switch is OFF.
2.
Insert the machine plug of the power supply cable
into the machine socket.
3.
I
nsert the power supply plug into the wall outlet, and
turn the power switch ON.
(1)
P
ower switch
(2)
M
achine socket
(3)
M
achine plug
(4)
P
ower supply plug
(5)
Wa
ll outlet
NOTE:
• Make sure to use the power supply cable that came
with the machine.
• If you turn OFF the power switch, wait for 5 seconds
before turning it on again.
WARNING:
• While in operation, always keep your eyes on the
sewing area, and do not touch any moving parts
such as the thread take-up lever, handwheel or
needle.
•
A
lways turn OFF the power switch and unplug the
machine from the power supply:
- when leaving the machine unattended.
- when cleaning the machine.
Before using your sewing machine
Before using your sewing machine for the rst time,
attach the hoop on the machine with a scrap of fabric and
run the machine for a few minutes to test sew.
Wipe away any oil which may appear.
Operating instructions:
The symbol “O” on the switch indicates the “OFF”
position of the switch.
For the U.S.A. and Canada only
Polarized plug (one blade wider than the other):
To reduce the risk of electric shock, this plug is intended
to t in a polarized outlet only one way. If it does not t
fully in the outlet, reverse the plug. If it still does not t,
contact a qualied electrician to install the proper outlet.
Do not modify the plug in any way.
1. 3.
2.
(1)
(5)
(4)
(2)
(3)
3.
Bekijk gratis de handleiding van Janome Memory Craft 100E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 100E |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 24843 MB |
