Janome Memory Craft 1000 handleiding
Handleiding
Je bekijkt pagina 52 van 212
50
Overedge Stitches
U10 Multiple zigzag stitch
Machine settings
(1) Stitch pattern: U10
(2) Presser foot: Zigzag foot A
(3) Thread tension: 3-7
(4) Foot pressure: 4-6
This stitch is used to nish a raw edge of synthetics and
other stretch fabrics that tend to pucker.
Sew along the fabric edge leaving an adequate seam
allowance.
After sewing, trim the seam allowance close to the
stitches.
(3)(2)(1)
(3)(2)(1)
U11 Overedge stitch
Machine settings
(1) Stitch pattern: U11
(2) Presser foot: Overedge foot C
(3) Thread tension: 3-7
(4) Foot pressure: 4-6
(2)
(1)
This stitch can be used to simultaneously seam and
overcast edges of fabrics.
Use this stitch when you do not need to open seams at.
Place the fabric edge next to the guide of the foot and
then sew.
(1) Edge of fabric
(2) Guide
(4)
(4)
CAUTION:
When using an overedge foot, make sure to set the
stitch width at 5.0 - 7.0, otherwise the needle may hit
the wires on the foot.
Bekijk gratis de handleiding van Janome Memory Craft 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 1000 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 41253 MB |
