Janome Memory Craft 1000 handleiding
Handleiding
Je bekijkt pagina 46 van 212
44
Needle Plate Guides
The seam guides are marked on the needle plate and
hook cover plate.
The seam guides for 1/4˝, 3/8˝ and 5/8˝ are also marked
on the front of the needle plate.
(1)
S
eam guides on the front of the needle plate
The numbers on the needle plate indicate the distance
from the center needle position in millimeters and inches.
(2)
Ce
nter needle position
The cornering guides are very useful when turning a
square corner.
(3)
C
ornering guide
The angle scales on the needle plate are useful for
patchwork piecing (refer to page 89).
(4) Angle scales
1.5 cm (5/8˝
)
Turning a Square Corner
To maintain a 5/8˝ seam allowance after turning a square
corner, use the cornering guide on the needle plate.
1.
S
top sewing when the front edge of fabric reaches
the cornering guide lines.
(1) Front edge of fabric
(2) Cornering guide
2.
R
aise the presser foot lifter and turn the fabric 90
degrees.
3.
Lower the presser foot lifter, and begin stitching in the
new direction.
1. 2. 3.
(2)
(1)
(4)
(2)
(1)
(3)
NOTE:
Lower the needle by pressing needle up/down button
if the needle stop position is set at up position.
Bekijk gratis de handleiding van Janome Memory Craft 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 1000 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 41253 MB |
