Janome Memory Craft 1000 handleiding
Handleiding
Je bekijkt pagina 45 van 212
43
Securing Seams
1.
For fastening the ends of seams, press the reverse
button and sew several reverse stitches.
The machine sews in reverse as long as you press
and hold the reverse button.
(1) Reverse button
2.
T
o cut the threads after nishing sewing, press the
thread cutter button.
(2) Thread cutter button
Changing Sewing Direction
1.
Stop the machine and raise the presser foot lifter.
2.
Pivot the fabric around the needle to change the
sewing direction as desired.
3.
L
ower the presser foot lifter and start sewing in a new
direction.
1. 2. 3.
1. 2.
(1)
(1)
(2)
(3)
3.
3.
To use the thread cutter on the face cover, remove
the fabric and draw it to the back.
Pull the threads up and slip them between the thread
cutter and face cover from behind.
Pull the threads toward you to cut.
(3) Thread cutter
NOTE:
After cutting the thread, you can start sewing without
drawing up the bobbin thread.
NOTE:
Use the thread cutter on the face cover to cut
specialized, #30 or thicker threads if the auto thread
cutter does not work well.
NOTE:
Lower the needle by pressing needle up/down button
if the needle stop position is set at the up position.
(1) Needle up/down button
Bekijk gratis de handleiding van Janome Memory Craft 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 1000 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 41253 MB |
