Janome Memory Craft 1000 handleiding
Handleiding
Je bekijkt pagina 34 van 212
32
Threading the Machine
3.
1.
2.
(1)
1.
4.
5.
6.
3.
(3)
(2)
(4)
Raise the presser foot lifter.
Press the needle up/down button to raise the take-up
lever to the highest position.
Press the lockout key to lockout the machine.
(1) Lockout key
2.
CAUTION:
Always make sure to press the lockout key to lockout
the machine or turn the power switch OFF before
threading the machine.
Pass the thread in order from
1.
to
6.
1.
Hold the thread with both hands and pass the thread
into the upper thread guide.
(2) Upper thread guide
2.
Be sure that the thread is pulled down under the
notch and into the space below the thread guide plate
as shown.
(3) Notch
3.
Firmly pull the thread toward you along the right
channel until the thread snaps.
Draw the thread down along the right channel and
around the bottom of the thread guide plate. Pull the
thread up along the left channel.
(4) Right channel
(5) Thread guide plate
(6) Left channel
(5)
(6)
Bekijk gratis de handleiding van Janome Memory Craft 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 1000 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 41253 MB |
