Janome Memory Craft 1000 handleiding
Handleiding
Je bekijkt pagina 12 van 212
10
GETTING READY TO SEW
Connecting the Power Supply
Using start/stop button
1.
First make sure the power switch is OFF.
2.
I
nsert the machine plug of the power supply cable
into the machine socket.
3.
I
nsert the power supply plug into the wall outlet, and
turn the power switch ON.
(1) Power switch
(2) Machine socket
(3) Machine plug
(4) Power supply plug
(5) Wall outlet
2.
3.
NOTE:
• Make sure to use the power supply cable that came
with the machine.
• If you turn OFF the power switch, wait for 5 seconds
before turning it on again.
WARNING:
• While in operation, always keep your eyes on the
sewing area, and do not touch any moving parts
such as the thread take-up lever, handwheel or
needle.
• Always turn OFF the power switch and unplug the
machine from the power supply:
- when leaving the machine unattended.
- when cleaning the machine.
• Do not place anything on the foot control.
Before using your sewing machine
Before using your sewing machine for the rst time,
place a scrap of fabric under the presser foot and run the
machine for a few minutes.
Wipe away any oil which may appear.
Operating instructions:
The symbol “O” on the switch indicates the “OFF”
position of the switch.
For the U.S.A. and Canada only
Polarized plug (one blade wider than the other):
To reduce the risk of electric shock, this plug is intended
to t in a polarized outlet only one way. If it does not t
fully in the outlet, reverse the plug. If it still does not t,
contact a qualied electrician to install the proper outlet.
Do not modify the plug in any way.
(2)
(3)
(4)
(5)
(1)
1. 3.
Bekijk gratis de handleiding van Janome Memory Craft 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 1000 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 41253 MB |
