Janome Horizon Memory Craft 9480QCP Handleiding (164 Pagina's)

Handleiding

51

(1)

(2)

(2)(3)

Manual Stitch Settings

You can alter the stitch width, needle drop position of

the straight stitches, needle thread tension, presser foot

pressure value and stitch length.

Turn the stitch width or length adjusting dial, or press the

“+” or “–” key beside the setting you wish to change to

change the setting. Press the default key to recover the

original stitch setting.

When you press the setting bar, the manual setting

window expands to show more options.

You can alter other settings such as needle thread

tension and presser foot pressure value, depending on

the selected stitch pattern.

Press the setting bar again to shrink the manual setting

window.

(1) Setting bar

(2) Manual setting window

(3) Default key

Altering stitch width

Turn the stitch width adjusting dial clockwise to increase

the stitch width.

Turn the stitch width adjusting dial counterclockwise to

decrease the stitch width.

You can also change the setting with the “+” or “–” key.

Press the “+” key to increase the stitch width.

Press the “–” key to decrease the stitch width.

NOTE:

The adjustable range for patterns U6-U7 and U9-U11

is 0.0 to 7.0.

(3.0)

(−) (+)

(+)

(−)

(4.5)

(−) (+)

(+)

(−)

Altering needle drop position (straight stitches)

Turn the stitch width adjusting dial clockwise to move the

needle drop position to the right.

Turn the stitch width adjusting dial counterclockwise to

move the needle drop position to the left.

You can also change the setting with the “+” or “–” key.

Press the “+” key to move the needle drop position to the

right.

Press the “–” key to move the needle drop position to the

left.

Bekijk gratis de handleiding van Janome Horizon Memory Craft 9480QCP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.