Janome Horizon Memory Craft 9480QCP Handleiding (164 Pagina's)

Handleiding

26

5.

Slowly release the needle threader lever to its original

position to pass the thread through the needle eye.

3.

Pull the thread up and slip it between the thread

cutter and face plate from behind.

Pull the thread toward you to cut.

4.

Pull down the needle threader lever as far as it will

go.

Built-in Needle Threader

1.

3.

4.

5.

(1)

(4)

(2)

2.

(3)

NOTE:

Be sure that the thread pass the slit of the needle

threader as shown.

(4) Slit

NOTE:

• The needle threader can be used with a #11 to #16

needle.

• Thread size 50 to 90 is recommended.

• Do not use thread size 30 or thicker.

• The needle threader cannot be used with the twin

needle.

1.

Press the needle up/down button to raise the needle.

Press the lockout key to lock the machine.

(1) Needle up/down button

(2) Lockout key

2.

Pull the thread up to the left, over the needle threader

guide while holding the thread near the spool with

your hand.

(3) Needle threader guide

NOTE:

If the thread loop is formed after releasing the needle

threader lever, pull out the thread loop through the

needle eye.

Bekijk gratis de handleiding van Janome Horizon Memory Craft 9480QCP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.