Janome Horizon Memory Craft 9480QCP Handleiding (164 Pagina's)

Handleiding

24

2.

Threading the Machine

(4)

Press the needle up/down button to raise the take-up

lever to the highest position.

Press the lockout key to lockout the machine.

The presser foot will go down and the upper thread

tension disks will open.

(1)

Lockout key

Pass the thread in order from

1.

to

8

.

1.

Hold the thread with both hands and pass the thread

into the guide slot.

(2)

Guide slot

2.

Be sure that the thread is pulled down under the

notch and into the space below the guide slot as

shown.

(3) Notch

1.

2.

5.

3. 4.

6.

7.

8.

1.

(2)

(3)

CAUTION:

Always make sure to press the lockout key to lockout

the machine before threading the machine.

(1)

3. 4.

(4)

(7)

(5)

(6)

3.

Hold the thread with both hands and draw the thread

around the corner of the guide.

Firmly pull the thread toward you along the right

channel until the thread snaps.

(4) Corner of the guide

(5) Right channel

4.

Draw the thread down along the right channel and

around the bottom of the thread guide plate. Pull the

thread up along the left channel.

(5) Right channel

(6)

Thread guide plate

(7) Left channel

Bekijk gratis de handleiding van Janome Horizon Memory Craft 9480QCP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.