Janome Horizon Memory Craft 7700QCP Handleiding (96 Pagina's)

Handleiding

72

Twin Needle Sewing

CAUTION:

Tu rn off the machine before changing the needle and

threading the machine.

When sewing with the twin needle, press the twin needle

key .

NOTES:

Use the zigzag foot A or satin stitch foot F.

Use #60 or finer threads.

Test the stitches before you begin to sew.

Threading the machine for twin needle

Raise the needle to the highest position and raise the

presser foot.

Attach the extra spool pin (refer to page 14).

Draw both threads from the spools and pass them

through the points from z to m.

Make sure that the two strands of thread do not get

tangled.

Pass one of the threads through the needle bar thread

guide on the left, and the other on the right.

1 Needle bar thread guide (left)

2 Needle bar thread guide (right)

Thread the needles from the front to back by hand.

NOTES:

Threading of points z to b is the same as for single

needle.

The needle threader cannot be used for the twin needle.

1

2

z

x

c

v

b

n

m

Bekijk gratis de handleiding van Janome Horizon Memory Craft 7700QCP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.