Janome Horizon Memory Craft 7700QCP Handleiding (96 Pagina's)

Handleiding

52

c Pull the buttonhole lever down as far as it will go.

1 Buttonhole lever

NOTE:

If you start sewing without pulling down the buttonhole

lever, the LCD screen will show a warning and the

machine will stop after a few stitches. Pull the buttonhole

lever down and start sewing.

v Insert the corner of the fabric under the foot. Press

the up/down needle position button twice.

Remove the fabric to the left to draw the needle

thread through the hole of the foot.

Place the fabric under the foot, and lower the needle

at the starting point of the buttonhole mark.

Then lower the foot.

2 Buttonhole mark

3 Starting point

4 Bobbin thread

5 Needle thread

NOTE:

Make sure there is no gap between the slider and the

front stopper, otherwise the buttonhole will be off the

position or there will be a sewing gap.

6 Slider

7 Front stopper

8 Off the position

9 Starting point

10 Sewing gap

1

2

3

5

4

6

7

9

8

10

c

v

Bekijk gratis de handleiding van Janome Horizon Memory Craft 7700QCP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.