Janome Horizon Memory Craft 7700QCP Handleiding (96 Pagina's)

Handleiding

42

Knit stitch

Machine settings

Pattern: 13 (Utility)

Thread tension: AUTO

Presser foot: Zigzag foot A

Foot pressure: 7

This stitch is recommended for sewing such fabrics as

synthetic knits and stretch velour as it provides the

greatest amount of elasticity and strength.

Sew along the fabric edge leaving an adequate seam

allowance.

After sewing, trim the seam allowance close to the

stitches.

Overcasting stitch

Machine settings

Pattern: 14 (Utility)

Thread tension: AUTO

Presser foot: Overcasting foot C

Foot pressure: 7

This is an excellent stitch for fabrics that tend to fray

extensively such as linens and gabardines.

Two rows of zigzag stitches are simultaneously sewn

over the edge to insure that fabric will not ravel.

Place the fabric edge next to the guide of the foot and

then sew.

1 Edge of fabric

2 Guide

NOTE:

The stitch width cannot be changed to less than 4.5.

Overcasting stitch

Machine settings

Pattern: 15 (Utility)

Thread tension: 6-8

Presser foot: Overedge foot M

Foot pressure: 7

This stitch finishes the edges of fabric similar to a

commercial overlocking machine for a professional look.

Place the fabric edge next to the guide of the foot and

then sew.

1 Edge of fabric

2 Guide

NOTE:

The stitch width cannot be changed.

2

1

2

1

Bekijk gratis de handleiding van Janome Horizon Memory Craft 7700QCP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.