Janome Horizon Memory Craft 7700QCP Handleiding (96 Pagina's)

Handleiding

20

Changing Needles

CAUTION:

Always make sure to turn the power switch off and

disconnect the machine from the power supply before

changing the needle.

Raise the needle by pressing the needle up/down position

button and lower the presser foot.

Turn the power switch off.

Loosen the needle clamp screw and remove the needle

from the clamp.

1 Needle clamp screw

Insert a new needle into the needle clamp with the flat

side of the needle to the rear.

When inserting the needle into the needle clamp, push it

up against the stopper pin and tighten the needle clamp

screw firmly with a screwdriver.

2 Flat side

3 Stopper pin

To check needle straightness, place the flat side of the

needle onto something flat (a needle plate, glass etc.)

The gap between the needle and the flat surface should

be consistent.

Never use a blunt needle.

4 Gap

Fabric

Light

Thread

Needle

Medium

Heavy

Lawn

Georgette

Tr i cot

Wool

Polyester

Cotton

Polyester

Fine jersey

Wool

Denim

Jersey

Coating

Quilting

Silk #80-100

Cotton #80-100

Synthetic #80-100

Silk #50

Cotton #60-80

Synthetic #50-80

Cotton #50

Silk #50

Cotton #40-50

Synthetic #40-50

Silk #30

Cotton #50

#9/65–11/75

#11/75–14/90

#14/90

#14/90–16/

100

#16/100

1

2

3

4

Bekijk gratis de handleiding van Janome Horizon Memory Craft 7700QCP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.