Janome Horizon Memory Craft 7700QCP handleiding
Handleiding
Je bekijkt pagina 19 van 96
17
Threading the Machine
Raise the presser foot. Press the needle up/down position
button twice to raise the needle.
Turn the power switch off.
Pass the thread in order from z to m.
z Hold the thread with both hands and pass the thread
into the guide slot.
1 Guide slot
x Draw the thread to the left and around the corner of
the guide toward you.
Pull the thread along the channel.
2 Corner of the guide
3 Channel
c Draw the thread down along the right channel and
around the bottom of the thread guide plate.
Pull the thread up along the left channel.
4 Right channel
5 Thread guide plate
6 Left channel
v While holding the thread at the spool, firmly draw the
thread up and to the back of the take-up lever. Draw
the thread forward to draw it into the eye of the take-up
lever.
7Eye of the take-up lever
b Then pull the thread down along the left channel
and through the lower thread guide.
8 Lower thread guide
n Slide the thread behind the needle bar thread guide
from the left.
9 Needle bar thread guide
m Thread the needle with the needle threader (refer to
the next page).
1
2
3
4
9
8
7
6
z
c
x
b
v
5
n
z
c
x
b
v
n
m
Bekijk gratis de handleiding van Janome Horizon Memory Craft 7700QCP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Horizon Memory Craft 7700QCP |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 11361 MB |
