Janome Horizon Memory Craft 7700QCP Handleiding (96 Pagina's)

Handleiding

9

Raising and Lowering the Presser Foot

The presser foot lifter raises and lowers the presser foot.

1 Presser foot lifter

You can raise the presser foot higher than the normal up

position. This allows for setting the dual feed device,

attaching presser foot, and also helps you to place thick

layers of fabrics under the foot.

2 Extra lifted position

NOTE:

Do not turn the hand wheel of press the up/down needle

position button when the presser foot is in the extra lifted

position.

Knee Lifter

The knee lifter is extremely helpful when sewing

patchwork, quilting etc, since it allows you to handle the

fabric while your knee controls the presser foot.

Attaching the knee lifter

Match the ribs on the knee lifter with the notches in the

knee lifter socket and insert the knee lifter.

1 Knee lifter

2 Knee lifter socket

Adjusting the knee lifter

The angle of the knee lifter can be adjusted to fit you.

Loosen the setscrew and slide the angle bar in or out to

adjust the angle of the knee lifter.

Tighten the setscrew to secure the angle bar.

3 Setscrew

4 Angle bar

Using the knee lifter

Push the knee lifter with your knee to easily move the

presser foot up and down.

You can control how high the foot rises by the amount of

knee pressure you exert.

NOTE:

Do not touch the knee lifter while stitching, otherwise the

fabric will not be fed smoothly.

1

2

1

2

3

4

Bekijk gratis de handleiding van Janome Horizon Memory Craft 7700QCP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.