Janome Hello Kitty 11706 handleiding
Handleiding
Je bekijkt pagina 24 van 47
22
•Starting to sew
Raise the presser foot and position the fabric next
to a seam guide line on the needle plate.
Lower the needle to the point where you want to
start. Lower the presser foot and pull the threads
toward the back.
Depress the foot control. Gently guide the fabric
along the seam guide line letting the fabric feed
naturally.
NOTE: 5/8˝ (1.6 cm) seam allowance is most
common
• Securing a seam
To fasten the beginning of a seam, press the
reverse stitch control and sew several reverse
stitches first. Then start sewing forward.
Turning a Square Corner
The cornering guide is useful to maintain a 5/8”
seam allowance when turning a square corner.
1. Stop stitching when the front edge of the fabric
reaches the cornering guide lines.
2. Lower the needle by turning the handwheel
counterclockwise.
3. Raise the presser foot and turn the fabric
counterclockwise 90°.
4. Lower the presser foot and begin stitching in the
new direction.
• Finishing sewing
To fasten the ends of a seam, press the reverse
stitch control and sew several reverse stitches.
Raise the presser foot. Remove the fabric.
Straight Stitch
Stitch selector: 1 - 3
Needle thread tension: 2 to 6
Presser foot: Zigzag foot
1
2
3
1
3
2
SECTION 3. BASIC SEWING
Bekijk gratis de handleiding van Janome Hello Kitty 11706, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Hello Kitty 11706 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 4015 MB |
