Janome DC4030PR handleiding
Handleiding
Je bekijkt pagina 6 van 44
4
q
w
r
t
y
SECTION II. GETTING READY TO SEW
Connecting Machine to Power Supply
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power.
e
r
w
q
e
Operating Instructions:
The symbol “O” of a switch indicates the “off” position of
a switch.
For appliances with a polarized plug (one blade wider
than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way.
If it does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install
the proper outlet. Do not modify the plug in any way.
For Your Safety
* While in operation, always keep your eyes on the
sewing area. Do not touch any moving parts such as
the thread take-up lever, handwheel or needle.
* Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended.
- When attaching or removing any parts.
- When cleaning the machine.
* Do not place anything on the foot control, when not
sewing.
Using the foot control
q Foot control plug
w Machine socket
e Power supply plug
r Power switch
t Machine plug
y Foot control
u Red mark
1. Turn off the power switch r.
2. Insert the foot control plug q, and machine plug t
into the machine socket w.
3. Insert the power supply plug e into the outlet.
4. Turn on the power switch r.
NOTE:
The start/stop button does not work when the foot control
is connected.
Before Using Your Sewing Machine
Before using your sewing machine for the first time,
place a waste fabric under the presser foot and run the
machine without thread for a few minutes. Wipe away
any oil which may appear.
Using the start/stop button
q Machine socket
w Power supply plug
e Power switch
r Machine plug
1. Turn off the power switch e.
2. Insert the machine plug r into the machine socket q.
3. Insert the power supply plug w into the outlet.
4. Turn on the power switch e
When the machine is turned on, the mark is lit after
one second, and the indicator window will show .
CAUTION:
Do not pull the foot control cord beyond the red mark u.
u
Bekijk gratis de handleiding van Janome DC4030PR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | DC4030PR |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 4782 MB |
