Janome Continental M6 handleiding
Handleiding
Je bekijkt pagina 18 van 156
(7)
(4)(3) (5)
(8)
(6)
16
NOTE:
The thread cutter button does not function:
- directly after turning on the power.
- when the presser foot is raised with the presser
foot lifter.
- after being pressed 3 times in a row.
Use the thread cutter on the face plate if the thread is
#30 or thicker (refer to page 40).
(3) Auto-lock button
•
When the following stitch patterns are selected:
Utility Applique Quilt Bridge
14910 1011 12 1231234 5 6
14910 1011 12 1231234 5 6
14910 1011 12 1231234 5 6
14910 1011 12 1231234 5 6
Press the auto-lock button to sew a locking stitch
immediately. The machine will automatically stop.
When the machine is stopped, press the auto-lock
button and the LED signal (7) will blink. The machine
will immediately sew locking stitches and automatically
stop when the machine is started.
• When any other stitches are selected:
Press the auto-lock button to sew a locking stitch
at the end of the current pattern. The machine will
automatically stop.
When the machine is stopped, press the auto-lock
button and the LED signal (7) will blink. The machine
will sew a locking stitch at the end of the current
pattern and automatically stop when the machine is
started.
The machine will trim the threads automatically after
locking the stitch when the auto thread cutting is
turned on (refer to page 135).
(4) Needle up/down button
Press this button to bring the needle bar up or down.
The machine will stop with the needle in the down
position.
However, you can change the needle stop position in the
machine setting mode (refer to page 135).
(5) Thread cutter button
After nishing sewing, press this button to trim the
threads. The needle bar automatically rises after trimming
the threads (refer to page 40).
The LED signal (8) blinks when the machine trims
threads.
After using auto thread cutting or threading the bobbin
holder, you can start sewing without drawing up the
bobbin thread.
(6) Presser foot lifter button
The presser foot will go up or down by pressing this
button.
You can also use the presser foot lifter and knee lifter* to
raise and lower the presser foot (refer to page 20).
* Optional item
Bekijk gratis de handleiding van Janome Continental M6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Continental M6 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 22107 MB |
