Janome Continental M6 handleiding
Handleiding
Je bekijkt pagina 14 van 156
1.
4.
(1)
(5)
(4)
(2)
(6)
(7)
(3)
3.
2.
4.
(1)
(2)
(3)
12
Using Optional Foot Control
If you wish to use the optional foot control, pull out the
cord from the foot control and insert the pin connector
into the jack on the machine.
1.
First make sure the power switch is off.
2.
Insert the machine plug of the power supply cable
into the machine socket.
3.
Draw out the cord from the foot control and insert
the pin connector into the foot control
jack on the
machine.
4.
Insert the power supply plug
into the wall outlet, and
turn the power switch on.
(1) Power switch
(2) Machine plug
(3) Machine socket
(4) Pin connector
(5) Foot control jack
(6) Power supply plug
(7) Wall outlet
NOTE:
The start/stop button does not work when the foot
control is connected.
Cord storage
The cord of the foot control can be conveniently stored in
the cord storage under the base cover of the foot control.
(1) Base cover
(2) Cord
(3) Hooks
Operating Instructions:
Foot control model 21390 is for use with this sewing
machine.
Bekijk gratis de handleiding van Janome Continental M6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Continental M6 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 22107 MB |
