Janome 50816 handleiding
Handleiding
Je bekijkt pagina 6 van 40
4
SECTION 2. GETTING READY TO SEW
Connecting the Power Supply
z Turn the power switch off.
x Insert the machine plug into the machine
socket.
c Insert the power supply plug into the wall
outlet.
v Turn the power switch on.
q Power switch
w Machine plug
e Machine socket
r Power supply plug
t Wall outlet
NOTE:
• Before connecting to the power supply,
make sure the voltage shown on the
machine conforms to your electrical power.
• Before using your sewing machine for the
rst time, place a scrap of fabric under
the presser foot and run the machine with
thread for a few minutes. Wipe away any oil
which may appear.
WARNING:
While in operation, always keep your eyes
on the sewing area, and do not touch any
moving parts such as the thread take-up lever,
handwheel or needle.
Always turn off the power switch and unplug
from the power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control,
otherwise the machine will run intermittently.
q
w
e
r
t
Operating Instructions:
The symbol "O" of a switch indicates the "off"
position of a switch.
For an appliance with a polarized plug (one blade
wider than the other):
To reduce the risk of electrical shock, this plug is
intended to t in a polarized outlet only one way.
If it does not t fully in the outlet, reverse the plug.
If it still does not t, contact a qualied electrician
to install the proper outlet. Do not modify the plug
in any way.
The foot controller Model YC-482J or TJC-150 is
used with this sewing machine (USA market only).
z v
x
c
Bekijk gratis de handleiding van Janome 50816, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | 50816 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 4080 MB |
