Janome 49360 handleiding
Handleiding
Je bekijkt pagina 39 van 48
37
q
ew
r
Button Sewing
q Stitch pattern: 07
w Needle thread tension: 3 to 7
e Presser foot: Satin stitch foot F
r Feed dog: Dropped
z Lower the feed dog. Set the stitch length at 0.0.
x Match the holes of button to the horizontal slot on the
presser foot.
c Lower the foot to hold the button in place.
v Adjust the stitch width so the needle will enter the left
hole of the button.
b Tu rn the handwheel so that the needle will enter the
right hole of the button. Readjust the stitch width if
necessary.
n Stitch several times.
z x c v b n
m ,
m After you finish sewing, cut the thread but leave
3˝ to 4˝ of thread at the button.
, With a hand sewing needle, draw the top thread to
the reverse side of the fabric and knot the threads.
* After the button sewing is completed, raise the feed
dogs for normal sewing.
q
ew
Shelltuck Stitch
q Stitch pattern: 15
w Needle thread tension: 6 to 8
e Presser foot: Satin stitch foot F
Use a lightweight fabric (tricot, for example). Fold the
fabric as shown and stitch on the fold. Allow the needle
to just clear the folded edge to create a shelled edge.
You may need to increase the needle thread tension
slightly.
If you sew rows of shell stitches, space the rows at least
5/8˝ (1.5 cm) apart. You can also sew shell stitches on
knits or soft silky woven fabrics, in any direction.
SECTION IV. DECORATIVE STITCHING
Bekijk gratis de handleiding van Janome 49360, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | 49360 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 5542 MB |
