Janome 49360 handleiding
Handleiding
Je bekijkt pagina 27 van 48
25
q
ew
q
ew
Overedge Stitch
q Stitch pattern: 11
w Thread tension dial: 3 to 7
e Presser foot: Overedge foot C
This stitch pattern combines the straight and the zigzag
stitches, using the overedge foot, to seam and overcast
in one step.
It is ideal for 1/4˝ (0.6 cm) seams on knits (when
attaching ribbing) or on medium to heavyweight woven
fabrics where you want a narrow seam.
Place your fabric so that the raw edges fit under the wire
guides and touch the black ridge.
NOTE:
Stitch width should be set between 5.0 and 7.0.
The blue tip needle is recommended for stretch
materials.
Double Overedge Stitch
q Stitch pattern: 12
w Thread tension dial: 3 to 7
e Presser foot: Overedge foot C
This stitch can be used for sewing fabrics that tend to
fray extensively such as linens and gabardines.
Two rows of zigzag stitches are simultaneously sewn
over the edge to insure that your seams will not ravel.
Adjust the thread tension so both the needle and
bobbin threads meet at the edge of the fabric.
NOTE:
Stitch width should be set between 5.0 and 7.0.
The blue tip needle is recommended for stretch
materials.
Bekijk gratis de handleiding van Janome 49360, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | 49360 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 5542 MB |
