Janome 1522RD handleiding
Handleiding
Je bekijkt pagina 7 van 36
5
GETTING READY TO SEW
Connecting the Power Supply
z Turn the power switch off.
x Insert the machine plug into the machine
socket.
c Insert the power supply plug into the wall
outlet.
v Turn the power switch on.
q Power supply plug
w Power switch
e Wall outlet
r Machine socket
t Machine plug
CAUTION:
Before connecting to the power supply, make
sure the voltage shown on the machine
conforms to your electrical power.
WARNING:
While in operation, always keep your eyes
on the sewing area, and do not touch any
moving parts such as the thread take-up lever,
handwheel or needle.
Always turn off the power switch and unplug
from the power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control,
otherwise the machine will run intermittently.
Controlling the Sewing Speed
Sewing speed can be varied by the foot control.
The harder you depress the foot control, the faster
the machine runs.
q
e
w
r
t
Operating Instructions:
The symbol “O” on a switch indicates the “off”
position of the switch.
Foot controller Model YC-482J or YC-482J-EC is
for use with this sewing machine.
For the U.S.A. and Canada only
Polarized plug (one blade wider than the other):
To reduce the risk of electric shock, this plug is
intended to t in a polarized outlet only one way. If
it does not t fully in the outlet, reverse the plug. If
it still does not t, contact a qualied electrician to
install the proper outlet.
Do not modify the plug in any way.
Bekijk gratis de handleiding van Janome 1522RD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | 1522RD |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 3697 MB |
