Janome 1522RD handleiding
Handleiding
Je bekijkt pagina 18 van 36
16
Number
10 15 20 3/8 4/8 5/8 6/8
Distance (cm)
1 1.5 2 — — — —
Distance
(inch)
— — — 3/8 1/2 5/8 3/4
Seam Guide Lines
The numbers on the needle plate indicate the
distance between the center needle position and
the guideline.
The numbers in front are centimeters.
The numbers in back are fractions of an inch.
q Center needle position
w Guideline
e Numbers
Turning a Square Corner
To turn a square corner 5/8˝ (1.6 cm) from the
fabric edge.
Stop stitching and lower the needle by turning the
handwheel counterclockwise.
Raise the presser foot and turn the fabric to line
the edge with the 5/8˝ (1.6 cm) seam guide.
Lower the presser foot and begin stitching in the
new direction.
Line up the fabric edge facing you with the
cornering guide shown.
q Cornering guide
UTILITY STITCHES
Basic Zigzag
q Pattern selector: C
w Presser foot: Zigzag foot
e Thread tension: 2–5
r Stitch length: 0.5–4
t Stitch width: 5
Simple zigzag stitching is widely used for
overcasting, sewing on buttons etc.
Adjust the stitch length to suit your sewing needs.
q
w
e
q
q w e
r t
Bekijk gratis de handleiding van Janome 1522RD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | 1522RD |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 3697 MB |
