Janitza 800-CT8-LP handleiding
Handleiding
Je bekijkt pagina 22 van 56
22
800-CT8-LP module www.janitza.com
5. Connections/controls
Item Designation Description
1
4 current measurement inputs in the
group,
terminals 1-8
Low-power current measurements I5, I6, I7, I8
(connection of the LP current transformers).
2 LED
Lights up "red" at power-up and remains so until completion of initializa-
tion (module not yet initialized). Then there is a switchover to cyclic data
exchange (pos. 4).
3 LED
Lights "green" when the supply of power via the JanBus
interface of the basic device is correct. The device is ready for operation.
4 2 LEDs Blink “orange" during operation and indicate cyclic data exchange.
5
4 current measurement inputs in the
group,
terminals 1-8
Low-power current measurements I1, I2, I3, I4
(connection of the LP current transformers).
6 Bottom bolts For mounting the module on the DIN rail.
7 JanBus interface Connection contacts for the bus connector (item 8).
8 JanBus interface Bus connector insert (sockets) into the module.
9 Bus connector contacts (JanBus) Connection to a basic device (or connected modules).
10 Bus connector sockets (JanBus) Connection of additional modules.
Tab. Connections/controls
2
3
4
INFORMATION
The current measuring module is supplied with the
necessary screw terminals and bus connectors
(JanBus interface) for connection to a basic device or
other modules.
5
1
6
6
7
9
8
10
Bekijk gratis de handleiding van Janitza 800-CT8-LP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janitza |
| Model | 800-CT8-LP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7251 MB |
