Handleiding
Je bekijkt pagina 9 van 48
9
60 cm Built-In Oven Installation and Mounting
Place of use for product must be located before starting installation.
Product mustn’t be installed in places which are under the effect of
strong air ow.
Carry the product with minimum two people. Do not drag the product
so that oor isn’t damaged.
Remove all transportation materials inside and outside the product.
Remove all materials and documents in the product.
Installation Under Counter
Cabin must match the dimensions provided in Figure 2.
A clearance must be provided at the rear part of the cabin as
indicated in the gure so that necessary ventilation can be achieved.
After mounting, the clearance between lower and upper part of
the counter is indicated in Figure 5 with “A”. It’s for ventilation and
shouldn’t be covered.
Installation In An Elevated Cabinet
Cabin must match the dimensions provided in Figure 4.
The clearances with the dimensions indicated in the gure must be
provided at the rear part of cabin, upper and lower sections so that
necessary ventilation can be achieved.
Installation Requirements
Product dimensions are provided in the Figure 3.
Furniture surfaces for mounting and mounting materials to be used
must have a minimum temperature resistance of 100 °C.
Mounting cabin must be secured and its floor must be plane for
product not to tilt over.
Cabin floor must have a minimum strength that would handle a load
of 60 kg.
Placing and Securing the Oven
Place the oven into the cabin with two or more people.
Ensure that oven’s frame and front edge of the furniture match
uniformly.
GB
Bekijk gratis de handleiding van James HEE-BKD G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | James |
| Model | HEE-BKD G2 |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 3541 MB |