Jackson NXP-HTD handleiding
Handleiding
Je bekijkt pagina 25 van 56
07610-004-91-86-D
18
TROUBLESHOOTING
SETPOINTS
ADJUSTING
WASH TEMP
SETPOINT
To access setpoints, the machine should be on and not in cycle.
1. Push and hold button for a minimum of six seconds. Wash temperature shows
on display and will ash on and o.
2. Once button is released, each press and release of button fewer than three
seconds will advance wash temperature one degree at a time to a maximum of
170 °F, and will then roll over to 150 °F and advance up again.
3. Once desired temperature is selected, press and hold button for a minimum
of three seconds and no more than six seconds (after three seconds wash
temperature will stop ashing). Release button to accept and move to next
setting (rinse temperature).
1. Once setting changes to rinse temperature, rinse temperature shows on display
and will ash on and o.
2. Each press and release of button fewer than three seconds will advance wash
temperature one degree at a time to a maximum of 192 °F, and will then roll
over to 180 °F and advance up again.
ADJUSTING
RINSE TEMP
SETPOINT
If there is no activity
(button presses) for 30
seconds, display will exit
setpoints mode without
saving changes.
If there is no activity
(button presses) for 30
seconds, display will exit
setpoints mode without
saving changes.
150 °F
170 °F
170 °F
180 °F
192 °F
Bekijk gratis de handleiding van Jackson NXP-HTD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | NXP-HTD |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 7060 MB |
