Jackson NXP-HTD handleiding
Handleiding
Je bekijkt pagina 23 van 56
07610-004-91-86-D
16
DELIMING
OPERATION
Tank capacities of the machine are listed on the Operating Parameters page.
1. With power button on, raise door and lift standpipe to drain the machine.
2. Allow machine to completely drain.
3. Add deliming solution to tub per chemical supplier’s instructions.
4. Close door. The machine will ll and turn on heaters.
5. Once lling has stopped, press and hold power button until blue delime button
turns on (about three seconds). Release button and machine will start delime
cycle.
6. Display will count down the delime cycle and shut o once complete. If the
machine is not delimed, run delime cycle again.
7. Raise door and lift standpipe to drain the machine.
8. Once drained, put standpipe back in place and close door to rell the machine.
9. The machine is ready to wash ware once minimum wash temperature is
reached.
CAUTION! This equipment is not recommended for use with deionized water or other
aggressive uids. Using deionized water or other aggressive uids will result in corrosion and
failure of components and will void the warranty.
DELIMING
!
CAUTION
299
Bekijk gratis de handleiding van Jackson NXP-HTD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | NXP-HTD |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 7060 MB |
