Jackson NXP-HTD handleiding
Handleiding
Je bekijkt pagina 19 van 56
07610-004-91-86-D
12
1. Ensure wash temperature has reached a minimum of 150 °F.
2. Open door completely.
3. Slide rack of ware into the machine.
4. Close door and cycle starts automatically. LED ring on power button will turn
green.
5. When LED ring on power button turns red, cycle is complete.
6. Open door and remove rack of clean ware.
7. Replace with a rack of soiled ware and close door. Repeat this process.
Based on use, the scrap screen might become clogged with soil and debris as the
workday progresses. Operators should regularly inspect the scrap screen to ensure
it has not become clogged. If clogged, it will reduce the washing capability of the
machine. Instruct operators to clean-out the scrap screen at regular intervals or as
required by workload. Do NOT beat strainers to remove debris.
1. Turn machine off by pushing power button. Display and LED will turn off.
2. Open door and allow steam/heat to escape.
3. Raise standpipe and allow tub to drain.
OPERATING INSTRUCTIONS
OPERATION
WASHING A RACK OF
WARE
OPERATIONAL
INSPECTION
SHUTDOWN &
CLEANING
!
WARNING
WARNING! Wash tank
water will be hot!
150 °F
Bekijk gratis de handleiding van Jackson NXP-HTD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | NXP-HTD |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 7060 MB |
