Jackson DynaStar handleiding
Handleiding
Je bekijkt pagina 73 van 86
07610-004-66-53-F
66
When servicing plumbing components, take care not to damage the threads of each individual item. Damaged threads can
cause leaks and loss of pressure, which could adversely aect the performance of the DynaStar machine. It is strongly
recommended that teon thread tape—used in conservative amounts—be applied to threads when joining components
together. It is not advised to use thread sealing compounds, sometimes referred to as “pipe dope.” Compounds can be
ejected from the threads during the tightening process and become lodged in key components, rendering them useless,
including solenoid valves and pressure gauge isolation ball valves.
NOTICE
PARTS
HH-E NB PLUMBING
*Part must be ordered separately.
ITEM QTY DESCRIPTION PART NUMBER
1 1 Vacuum Breaker, 1/2" Brass 04820-003-06-13
2 1 Nipple, 1/2" x 6" Brass 04730-003-62-38
3 1 Tee 04730-002-22-56
4 1 Pressure Transducer 05945-004-17-01
5 1 Elbow, 90-Degree 1/4" x 1/4" 04730-003-77-83
6 1 Rinse Injector 09515-004-94-21
7 2 Plug, 1/8" NPT Brass 04730-209-07-37
8 1 Injector Plate 05700-002-04-71
9 1 Hose, Inlet Water, 1/2" 05700-005-02-39
10* 1
Harness
Cable, Braided (Not Shown)
05700-004-68-24
11 1 Solenoid Valve, 1/2" 04810-003-71-56
12 2 Nipple, 1/2" Close Brass 04730-207-15-00
13 1 Y-strainer, 1/2" 04730-217-01-10
14 1 Coupling, 1/2" 05700-004-47-97
Bekijk gratis de handleiding van Jackson DynaStar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | DynaStar |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 12043 MB |
