Jackson DishStar HT handleiding
Handleiding
Je bekijkt pagina 30 van 78
07610-004-37-13-S
23
1. Once setting changes to detergent priming time, current setting will ash on and
off.
2. Press prime button (left rocker to increase and right rocker to decrease). This
changes detergent priming time one second at a time.
3. Once desired time is selected, press and hold cycle button a minimum of three
seconds and no more than ve seconds (after three seconds time will stop
ashing). Release cycle button to accept and move to next setpoint (rinse-aid
priming time).
1. Once setting changes to rinse-aid priming time, current setting will ash on and
off.
2. Press prime button (left rocker to increase and right rocker to decrease). This
changes rinse-aid priming time one second at a time.
3. Once desired time is selected, press and hold cycle button a minimum of three
seconds and no more than ve seconds (after three seconds time will stop
ashing). Release cycle button to accept and move to next setpoint (energy
saver on/off).
TROUBLESHOOTING
HT SETPOINTS
If there is no activity
(button presses) for 30
seconds, display will exit
Setpoints mode without
saving changes.
DETERGENT
PRIMING TIME
RINSE-AID
PRIMING TIME
To exit Setpoints at any
time, hold cycle button a
minimum of six seconds.
Display will stop ashing
and return to wash
temperature. Machine is
ready to operate.
70
77
77
180
177
177
Bekijk gratis de handleiding van Jackson DishStar HT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | DishStar HT |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 11176 MB |
