Jackson DishStar HT handleiding
Handleiding
Je bekijkt pagina 19 van 78
12
07610-004-37-13-S
INSTRUCTIONS
INSTALLATION
8. Press ENTER button. This saves the changed parameters and exits the
programming mode. PGM light will go from steady to ashing.
9. To change any other values, repeat the process above. To revert back to a
previous setting, repeat the process above and change parameters back to
previous settings.
In programming mode, if there have been no keypad inputs for approximately two
minutes, the system will automatically exit out of programming mode. Any changes
to parameters will be lost when programming mode is automatically exited.
The dishmachine is designed to operate while level. This is important to prevent any
damage to the machine during operation and to ensure the best possible results.
The unit comes equipped with adjustable bullet feet which can be turned using a
pair of pliers. Since this machine is an undercounter unit, it should be leveled as
close as possible to the unit's location before it is pushed under the counter.
1. Press POWER button and listen for machine to stop lling.
2. Press POWER button and listen for machine to stop draining.
3. Repeat Steps 1 and 2.
4. Press POWER button and listen for machine to stop lling.
5. Machine is now ready for operation.
1 2 3 4 5 6 7 8
ON
8
4
2
1
0.8
0.4
0.2
0.1
A
B
C
D
E
F
G
H
PGM
ACCEPT
MOVE
ENTER
IN
SEC
LIGHTS TIME
BUTTONS
C
H
E
C
K
F
U
S
E
PROGRAMMING
CHEMICAL FEEDER
PUMPS (LT/LT-H)
LEVELING
x2
INITIAL FILL
(HT ONLY)
HT models with serial
numbers before 23D415452
have different initial ll
instructions. Click here to
open earlier manual.
Bekijk gratis de handleiding van Jackson DishStar HT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | DishStar HT |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 11176 MB |
