Jackson DishStar HT-E handleiding
Handleiding
Je bekijkt pagina 16 van 54
9
07610-004-43-79-D
PROGRAMMING
CHEMICAL
FEEDER PUMPS
INSTRUCTIONS
INSTALLATION
3. To prime the rinse-aid pump, press the II button and hold for one minute. The
amount of rinse-aid might need to be adjusted depending on water hardness
and results.
4. Please refer to to the section below for instructions on adjusting the amount of
chemicals being dispensed.
PRIMING CHEMICAL
FEEDER PUMPS
To access the programming mode, the machine must be ON and "READY" (between
cycles).
On the timer board, press and hold both the MOVE and ENTER buttons simultaneously
for two seconds.
The PROGRAM (PGM) light and light A will illuminate.
Once in the programming mode, the MOVE button is used to scroll between
the programming categories and the ENTER button is used to select the
category.
Press the MOVE button to move the solid light to the desired location of FILL, RINSE
AID, or DETERGENT. Please note that options A, B, C, and D are not adjustable
outputs.
Press the ENTER button for the chosen category. Now, the (PGM) light will illuminate
along with lights corresponding to the time values for the chosen category. The
ACCEPT light will blink.
The PROGRAM light will illuminate.
To change the value of a parameter, use the MOVE button to illuminate the light next
to the time option (time is measured in seconds). In the time categories, each second
in use will light up. To deselect the option, press ENTER and the light will go o, press
ENTER again and it will illuminate. Once you have set your time category, press the
MOVE button until the ACCEPT light illuminates and press ENTER. This will save the
changed parameters and exit the programming mode.
155
F
READY
RINSE AID PRIME
NOTICE
Bekijk gratis de handleiding van Jackson DishStar HT-E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | DishStar HT-E |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 8316 MB |
