Jackson DishStar ADA-SEER handleiding
Handleiding
Je bekijkt pagina 18 van 60
11
07610-004-99-71-B
1. Close door.
2. Press power button. LED ring on power button will turn red.
3. Machine will start filling automatically.
4. Wait until wash temperature on display reaches a minimum of 155 °F.
Proper ware preparation helps ensure good results and fewer re-washes. If not done
properly, ware might not come out clean and the eciency of the dishmachine will
be reduced. Scraps should always be removed from ware before being loaded into
a rack. Pre-rinsing and pre-soaking are good ideas, especially for silverware and
casserole dishes.
Place cups and glasses upside-down in racks so they don't hold water during the
cycle. The machine sanitizes as well as cleans. To do this, ware must be properly
prepared before being placed in the machine.
1. Follow Filling the Wash Tub section, ensuring temperature is at least 155 °F.
2. Open door completely.
3. Slide rack of ware into the machine.
4. Close door.
WASHING A RACK
OF WARE
WARE
PREPARATION
OPERATING INSTRUCTIONS
OPERATION
155
°
F
FILLING THE
WASH TUB
110
°
F
155
°
F
It might take several minutes before wash temperature is seen rising. First ll of
the day, wash temperature won't rise until rinse tank reaches proper temperature.
NOTICE
Temperature shown is
the minimum required
temperature.
Bekijk gratis de handleiding van Jackson DishStar ADA-SEER, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | DishStar ADA-SEER |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 7542 MB |
