Irradio IR-GT710V handleiding
Handleiding
Je bekijkt pagina 13 van 36
Shut-down
The appliance automatically switches off in the following two cases:
1) The mobile device to which the device is paired is disconnected for more than ten minutes
2) Playback is paused for more than ten minutes in any mode
To switch off the appliance voluntarily, briefly press the button (2).
When switching off, the appliance emits a confirmation sound; to restart the appliance after an automatic shut-down,
briefly press the button (10).
Charging:
The appliance signals that the built-in battery needs charging with a specific announcement, recurring if applicable. To carry
out this operation in the best possible way, keep in mind that:
• The appliance must be charged as soon as possible when the need is signalled: excessive use with a discharged battery
can compromise subsequent recharges and reduce the efficiency of the battery.
• Charging must not be interrupted if possible.
• Charging in progress is indicated by the LED bar (4) lighting up white progressively: charging is complete when the LED
bar is fully lit and no parts of it flashIdeal charging is carried out with a high-powered charger, such as for tablets, i.e. with
a current of at least 2 amps: charges with lower currents are generally inadvisable because they could cause partial charging
of the battery, as well as take a long time.
• Charging from the USB port of a PC is usually very slow.
To start charging, simply connect the supplied cord to the USB-C socket (12) via the small connector, then connect the large
connector to a 5V voltage source with USB socket. Verify the start of charging by paying attention to the LED bar, which
should turn white in a sequential and increasing manner.
6. CLEANING AND MAINTENANCE
The appliance does not require maintenance, understood as the replacement of consumables or scheduled servicing;
periodic removal of dust with a dry cloth suitable for the function is sufficient. Every cleaning operation must absolutely be
carried out with the appliance switched off: the use of a damp cloth or any atomised detergent must be avoided given the
presence of a non-separable battery and given the possibility that certain voltage points may be reached by liquids. Even if
stains or accumulations of dirt must be removed, proceed without wetting or soaking the appliance: in any case, avoid
aggressive detergents, abrasive sponges, iron wool or other chemical cleaners.
7. TROUBLESHOOTING
Problem: The appliance stays off
Possible cause 1: The battery is flat
Probable solution 1: Charge the battery
PC2: The electrical outlet of the charger is not powered
PS2: Check the switches on the electrical panel
Problem: USB playback does not start
PC1: USB pendrive is not fully inserted
PS1: Insert pendrive fully into socket (6)
PC2: USB pendrive contains no readable content
PS2: Save content to be played back on the USB pendrive in MP3 or WAV format
PC3: Pendrive is not formatted with FAT32 file system
PS3: Reformat the pendrive with FAT32 file system and save the tracks again
Problem: The appliance keypad is not responding
PC1: A software crash has occurred
PS1: Reset by inserting a long, cylindrical object with a diameter of less than 3 mm into the jack socket (14).
Problem: Wireless connection does not complete
PC1: Mobile device does not have correct wireless protocol
PS1: Use a different mobile device
PC2: Correct protocol is deactivated on the mobile device
PS2: Enable correct protocol on the mobile device, using settings menu
PC3: Too many wireless devices are within range
PS3: Deactivate as many wireless devices as possible within range except the IR-GT710V
Bekijk gratis de handleiding van Irradio IR-GT710V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Irradio |
| Model | IR-GT710V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5814 MB |
