Irradio IR-GT710V handleiding
Handleiding
Je bekijkt pagina 11 van 36
1. Light effect button
2. Equalisation indication
3. Equalisation button
4. Charging indicator LED bar
5. – button
6. Play/Pause button
7. + bar
8. Connection indicator LED
9. Wireless button
10. On/Off/Mode button
11. Decorative LED bar
12. USB-C socket
13. USB port
14. Aux-in input
4. COMMISSIONING AND FIRST START-UP
Some preliminary operations are necessary before first use. Proceed as follows:
1) Unpack the appliance and check the conditions and completeness of the equipment, as indicated in the
previous chapter.
2) Keep the packaging for 15 days in case it needs to be returned to the retailer; after this period, dispose of it in
accordance with the instructions on the separation of materials indicated on it.
3) Read this manual in its entirety, paying particular attention to the instructions for safe use.
4) Carefully remove all possible fastening materials from parts, including internal parts.
5) Fully remove any stickers from the surface of the appliance.
6) Place the appliance on a flat, stable surface, taking care to reserve 10 cm of space on all sides, at the rear and
above the appliance for the necessary air circulation.
7) Refer to chapter 2 for further details and instructions on appliance positioning and installation.
8) Connect the supplied cord to the USB-C socket (12) via the small connector, then connect the large connector
to a 5V voltage source with USB socket.
9) Ensure that the cord does not come into contact with hot parts and that it is not subjected to excessive bending
or kinking.
10) Wait a few hours until the LED bar turns completely white (4).
11) Disconnect the cord from the USB-C socket (12).
12) Press the 'Mode' button (10) for a few seconds.
13) Verify that the appliance emits a welcome pattern, followed by the word “wireless”, indicating the operating
mode.
The appliance can now be used normally.
5. USING THE APPLIANCE
The buttons: meaning and use
Button
#
Short press
Double short press
Long press
In call
1
Changes decorative LED
bar graphics sequence
(11)
No function
Switches decorative
LED bar on/off (11)
No function
3
Switches equalisation
mode
No function
No function
No function
5
Previous track
No function
Reduces volume
No function
6
Starts/pauses playback
No function
No function
No function
7
Next track
No function
Increases volume
No function
9
Switches to wireless
mode
Starts/stops TWS
coupling
Disconnects and
restarts wireless
connection
No function
10
Switches source
(wireless, USB, Aux-in)
No function
Switches the appliance
on/off
No function
Bekijk gratis de handleiding van Irradio IR-GT710V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Irradio |
| Model | IR-GT710V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5814 MB |
