Irradio B-TOWER handleiding

Handleiding

123456789101112131415161718/ 18

Afdrukken

Je bekijkt pagina 14 van 18

14

At the standby mode, press and hold the CLOCK button on the remote until Hour ashes

on the screen with “CLK” shows on the screen; use the TUNING UP/DOWN buttons on the

remote to adjust the hour and conrm your adjustment by pressing the CLOCK button on the

remote; Minute starts blinking on the screen, press the TUNING UP/DOWN buttons on the

remote to set the minute accordingly, press CLOCK button on the remote again to conrm

your setting.

During playback, press the CLOCK button to check the current time.

Note: The time only could be set on standby mode.

This unit can receive stereo audio signal from a BLUETOOTH stereo audio source device.

1. Power on the unit, switch to BLUETOOTH mode by pressing SOURCE repeatedly.

2. LED indicator rapid blinking while it is pairing.

3. Pair and connect to B-TOWER on the BLUETOOTH audio source device. If prompted for

passcode, enter “0000”.

4. Pairing successful (LED indicator blue), ready to stream music.

5. Press the PLAY/PAUSE button to pause or resume playback.

6. During playback, press the SKIP/SEARCH UP/DOWN button to skip to the next or

previous track. Press and hold the SKIP/SEARCH UP/DOWN button to search through the

current track forward or backward.

Note:

> Pairing mode is canceled about 1.5 minutes.

> The above are generic steps to pair a BLUETOOTH device, for more specic

instructions on BLUETOOTH connectivity for your device, please consult your

manufacturer’s manual.

> Once the unit enters to the BLUETOOTH mode, it will connect to the last paired

external BLUETOOTH device automatically.

If the device is already paired with the B-TOWER, but became unconnected even with both

Bluetooth devices turned on. You can re-connect them by following steps:

1. Press and hold the PAIR button to re-link the audio source device. The Bluetooth indicator

will blink for about 1.5 minutes for connecting.

2. Select B-TOWER on the audio source device for connecting. Bluetooth indicator will turn

to solid blue if the B-TOWER and the device have been re-connected successfully.

3. You can also re-connect the B-TOWER by using Bluetooth operation of the device to be

connected.

HOW TO SET TIME

BLUETOOTH OPERATING

RE-CONNECT TO THE BLUETOOTH AUDIO SOURCE DEVICE

123456789101112131415161718/ 18

Bekijk gratis de handleiding van Irradio B-TOWER, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Speaker