Iris Ohyama SCD-130P handleiding
Handleiding
Je bekijkt pagina 18 van 76
Black SCD-130P
EN
18
The soft roller
brush stops
operating
●
Dust or a string has wound around
the rotating unit, or the rotating unit
is clogged
●
Clean the oor head.
(
→
P12)
➡ ➡
State
Causes Measures
If you cannot resolve the problem after implementing the above actions;
Please contact the store where the product was purchased from or the Iris Call Center.
IRIS OHYAMA EUROPE Customer Service E-mail
CustomerService@iriseurope.fr
●
Do not try to disassemble, repair or modify the cleaner yourself.
The main unit and
charging adapter
become warm
during battery
charging
The dust sensor
light does not turn
yellow or green
The sensor light
does not turn red
●
The battery or circuit generates a
little heat because the charging
current is owing
●
The cleaner is used on a carpet or
bedding
●
If the cleaner is used without the
head or nozzle, the dust sensor
may be interrupted by natural
light, causing a malfunction of the
cleaner
●
This is not an error.
●
The sensor may continuously turn red because it
senses loose hair and house dust inside the cleaner.
●
Attach the oor head or the attachment supplied
before operating.
➡
➡
➡
➡
➡
➡
The main unit
becomes warm
while the cleaner
is operating
The dust cup
cannot be
attached
Suction power
remains the same
even after the
color of the dust
sensor light has
changed
●
The main unit becomes a little
warm due to the heating of the
battery and motor
●
The recessed part on the bottom of
the dust cup does not t onto the
hook
●
The cleaner works in the normal
mode or turbo mode
●
This is not an error.
●
Press down the upper side of the dust cup after
ensuring that the recessed part on the bottom of the
dust cup is attached to the hook.
(
→
P11
)
●
In the normal mode or turbo mode, the cleaner keeps
operating in the selected mode regardless of the
color of the dust sensor light. To change the suction
power in conjunction with the light color, operate the
cleaner in the AUTO mode.
(
→
P9
)
➡
➡
➡
➡
➡
➡
The dust sensor
light turns yellow
or red even when
the cleaner is not
sucking dust
●
The dust sensor is stained
●
Clean the dust sensor.
(
→
P12
)
➡ ➡
Troubleshooting
(continued)
Bekijk gratis de handleiding van Iris Ohyama SCD-130P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Iris Ohyama |
| Model | SCD-130P |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 12402 MB |
