IOttie Easy One Touch Connect Pro handleiding
Handleiding
Je bekijkt pagina 5 van 40
03
A. Connect the Mount Cradle
with the Ball Joint.
B. Tighten the Cradle Knob.
2. Selecting a Location
Choose an installation method: Dashboard/ Flat Surface (A) or Windshield/
Curved Glass (B)
Assembly & Installation
1. Assembling the Mount
1. Peel o the protective
film on the Dashboard
Pad and stick the
pad on the desired
location.
Option A
Dashboard or Flat Surface Installation
Choose a mount location before peeling o any films, and make sure
it is flat and free from any dust or debris.
3. Push the Locking
Lever down to
engage the suction.
2. Remove the plastic
cover on the Suction
Cup and press the
Mount firmly onto the
Dashboard Pad.
Connecting Power
The Easy One Touch Connect Pro is powered via a micro-USB cable. There is no
o/on switch on the device. Once it is plugged in, the device will remain on unless
the vehicle shuts o power when in parking mode.
1. Plug the micro-USB cable into
the USB port on the back of the
Mounting Head.
1. Remove the plastic cover from the
Suction Cup and press the Mount
firmly onto the windshield.
2. Push the Locking Lever down
to engage the suction.
2. Insert the Car Charger into your
vehicle’s power port.
Option B
Windshield or Curved Glass Installation
Choose a mount location before peeling o any films, and make
sure it is free from any dust or debris.
!
Product Setup
08 / 09EN
Bekijk gratis de handleiding van IOttie Easy One Touch Connect Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOttie |
| Model | Easy One Touch Connect Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3209 MB |