Handleiding
Je bekijkt pagina 16 van 19
ION Audio Wave Rider
TM
X User Guide 16
I
f the unit is not charging: Make sure the power cable is properly connected to the power
input and the power outlet.
I
f the sound is distorted: Try lowering the volume control of your sound source.
I
f there is too much bass: Try adjusting the tone or EQ control on your sound source to lower
the bass level. This will allow you to play the music louder before clipping (distortion) occurs.
I
f you cannot connect your audio device to Wave Rider
TM
X via Bluetooth:
• Have your audio device (e.g., smartphone or tablet) and Wave Rider
TM
X as close together
as possible while trying to connect. Make sure both the audio device and Wave Rider
TM
X
are unobstructed by walls, furniture, etc.
• Press the B
luetooth button to disconnect Wave Rider
TM
X
from any other audio device and
restart the search process. If this does not work right away, power o Wave Rider
TM
X and
then power it back on. See O
peration > Pairing a Bluetooth® Device for more information.
• Reset the Bluetooth connection on your audio device by turning Bluetooth o and back
on. You can find this under the Bluetooth menu in the Settings for your phone or other
audio device.
If this does not work, and you have connected to Wave Rider
TM
X
before, find Wave Rider
TM
X in the list of available or previously connected devices in your audio device's Bluetooth
menu, tap the "gear" or “i” icon located next to it and then select U
npair or Forget. Turn
Wave Rider
TM
X o and back on and try pairing again once it reappears in your available
devices list.
Note: If Wave Rider
TM
X has been paired to another audio device recently that is still within
range, you may need to repeat this process with that audio device to fully disconnect.
I
f you experience audio dropouts while playing music from a Bluetooth device, this may be
happening because your unit is trying to link to another speaker. This can occur if you power
o a speaker that was linked to your unit or if you have just turned on your unit and it is in
Stereo-Link™ mode. To stop the audio dropouts, exit Stereo-Link™ mode by double-pressing
the B
luetooth button. Alternatively, you can wait for your unit to link to another speaker if
there is one within range.
TROUBLESHOOTING
Bekijk gratis de handleiding van Ion Wave Rider X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ion |
| Model | Wave Rider X |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 1773 MB |
