Ion Tailgater XL handleiding

19 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 19
ION Audio Tailgater
®
XL User Guide 11
Pairing a Bluetooth® Device
1. Turn on your Bluetooth® device.
2. Power on Tailgater® XL by holding down the P
ower button for 2 seconds. The speaker will
then enter Bluetoot
pairing mode.
3. Navigate to your device’s Bluetooth® setup screen, find T
AILGATER XL, and connect. The
B
luetooth® icon will appear in the display, and if voice prompts are enabled, you will hear
“Bluetooth®
Connected”.
If the speaker does not connect to a Bluetooth® device within 60
seconds, it will switch to Aux mode. You will need to single press the Bluetooth®
button to
enter Bluetooth®
mode.
Note: If your Bluetooth device prompts for a pairing code, enter “0000”.
Note: Do not connect to iPA150C_BLE; this is reserved exclusively for connecting to the
ION Sound Control
TM
app. If you experience trouble in connecting, select “Forget this
Device” on your Bluetooth device and try to connect again.
T
o disconnect a paired device, do any of the following:
Turn o Bluetooth® from your device’s Bluetooth® settings. The speaker will enter
Bluetooth® pairing mode to make it available for another device.
Double-press the B
luetooth® button to disconnect and re-enter pairing mode.
Briefly press the B
luetoot button to disconnect and enter Aux mode.
Once you have disconnected, you will hear “Bluetooth® Disconnected” if voice prompts are
enabled.
Tip: Press and hold the Bluetooth button for three seconds to turn voice prompts on or o.
1 - PRESS AND HOLD FOR 2 SECONDS
2
TAILGATER™ XL
1 - PRESS AND HOLD FOR 2 SECONDS
2 - SPEAKER 1 - PRESS
4
TAILGATER™ XL
3 - SPEAKER 2 - PRESS

Bekijk gratis de handleiding van Ion Tailgater XL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkIon
ModelTailgater XL
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2053 MB