Handleiding
Je bekijkt pagina 11 van 13
ION Audio Glow Stone™ Link User Guide 11
I
f the unit is not charging: Make sure the USB-A to USB-C® charging cable is properly
connected to the power input, the power adapter, and the power outlet.
I
f the sound is distorted: Try lowering the volume control of your sound source.
I
f there is too much bass: Try adjusting the tone or EQ control on your sound source or on
Glow Stone™ Link via the ION Sound Control™ App to lower the bass level. This will allow you
to play the music louder before clipping (distortion) occurs.
I
f you cannot connect your audio device to Glow Stone™ Link via Bluetooth:
• Have your audio device (e.g., smartphone or tablet) and Glow Stone™ Link as close
together as possible while trying to connect. Make sure both the audio device and Glow
Stone™ Link are unobstructed by walls, furniture, etc.
• Double-press the Bluetooth button to disconnect Glow Stone™ Link from any other
audio device and restart the search process. If this does not work right away, power o
Glow Stone™ Link and then power it back on. See O
peration > Pairing a Bluetooth®
D
evice for more information.
• Reset the Bluetooth connection on your audio device by turning Bluetooth o and back
on. You can find this under the Bluetooth menu in the Settings for your phone or other
audio device.
If this does not work, and you have connected to Glow Stone™ Link before, find Glow
Stone™ Link in the list of available or previously connected devices in your audio
device's Bluetooth menu, tap the "gear" or “i” icon located next to it and then select
U
npair or Forget. Turn Glow Stone™ Link o and back on and try pairing again once it
reappears in your available devices list.
Note: If Glow Stone
TM
Link has been paired to another audio device recently that is still
within range, you may need to repeat this process with that audio device to fully
disconnect.
If you experience audio dropouts while playing music from a Bluetooth device, this may be
happening because your unit is trying to link to another speaker. This can occur if you power
o a speaker that was linked to your unit or if you have just turned on your unit and it is in
Multi-Sync™ mode. To stop the audio dropouts, exit Multi-Sync™ mode by double-pressing the
B
luetooth button. Alternatively, you can wait for your unit to link to another speaker if there
is one within range.
I
f there is a delay in the audio signal between the left and right speakers when linked, break
the link by double-pressing the B
luetooth button, and pair them again following the
instructions in the O
peration > Multi-Sync
TM
section.
TROUBLESHOOTING
Bekijk gratis de handleiding van Ion Glow Stone Link, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ion |
| Model | Glow Stone Link |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 1794 MB |
